Atlanta Brick Fence & Wall Construction
Boundary walls, privacy screens and garden walls built on continuous footings with piers, capping and movement joints designed in.
Brick Walls That Stay Straight For Decades
Brick Fence & Wall Construction in Atlanta
Brick fence and wall construction in Atlanta buys you something no timber fence can: permanence. A brick boundary wall does not warp in humidity, does not rot at the base, does not need staining every few years, and will comfortably outlast three or four replacement fences on the same line.
It also does the job better. A solid wall blocks sightlines completely and cuts road noise in a way slatted timber never manages, which matters on Atlanta’s busier residential corridors and corner lots.
The engineering is what makes it last. Long walls need a continuous footing below stable ground, piers at regular centres to resist wind, movement joints so seasonal expansion cracks where you decide, and a cap that throws water clear of the face.
Get A Free Estimate
Our Brick Fence in Atlanta
Boundary, privacy, garden and entrance walls, each detailed for the job it actually does.
-
Boundary Walls
Full-height perimeter walls marking a property line permanently. Built with piers at calculated centres and a continuous footing, so a long run stays straight instead of developing a visible wave.
-
Privacy Screen Walls
Solid walls positioned to block a specific sightline — a neighbour’s window, a busy road, a pool area. Height and position are worked out on site, because privacy is about angles rather than raw height.
-
Garden and Planter Walls
Low walls defining beds, terraces and seating areas. Where they retain any soil they get drainage and weep holes, since a garden wall backfilled without them is a retaining wall that will eventually fail.
-
Entrance Walls with Pillars
Curved or stepped wing walls sweeping into driveway entry pillars. Often the highest-impact masonry on a property, and the piece most responsible for how the whole frontage reads from the street.
-
Pierced and Screen Bond Walls
Decorative bonds with deliberate openings that let air and dappled light through while keeping the wall visually solid. Well suited to Atlanta courtyards and pool surrounds where airflow matters.
-
Wall Repair and Rebuild
Leaning sections rebuilt, cracked areas cut out, failed caps replaced and footings underpinned. Where a wall has moved, the footing is usually the culprit, so we assess the base before quoting the face.
Why Choose Our Brick Fence & Wall Construction Company in Atlanta
-
Continuous Footings, Properly Dug
A long wall concentrates load along a line, and Georgia clay moves. We excavate to stable bearing and pour a continuous reinforced footing rather than the shallow trench that leaves walls leaning.
-
Piers at Calculated Centres
Freestanding brick walls need piers to resist wind load, spaced according to height and thickness. Get the spacing wrong and a wall that looks fine on day one bows within a few storm seasons.
-
Movement Joints Designed In
Long brick walls expand and contract with Atlanta’s temperature swings. We place vertical movement joints at sensible intervals so that inevitable movement is absorbed instead of cracking the wall randomly.
-
Capped to Shed Water
An uncapped wall soaks up rain through its top course and pushes it down into the body. Every wall we build gets a proper cap with an overhang and drip so water is thrown clear of the face.
-
Permits and Boundaries Checked
Height limits, setbacks and permit thresholds vary across metro Atlanta counties, and a wall on a shared line has legal implications. We identify what applies and handle the permitting.
-
Licensed, Insured, Referenced
Boundary walls are permanent, heavy and often sit on a shared line, so licensing and insurance genuinely matter. We are fully covered and can point you at comparable walls built years ago.
Cost of Brick Fence & Wall Construction in Atlanta
Brick fences and boundary walls in Atlanta typically cost $60 to $200 per linear foot, putting most residential runs between $5,000 and $20,000. Height is the single biggest driver, followed by wall thickness, brick selection and the number of piers. A capped wall with pilasters at intervals costs more per foot than a plain run, and looks it.
Footings are a significant share of the cost and none of it is visible in the finished wall. In metro Atlanta that means a poured reinforced footing below frost depth and below the active clay zone — generally at least twelve inches deep and wider than the wall. Footings placed shallow to save money are why you see brick fences with stepped diagonal cracks.
Atlanta Brick Fence & Wall Construction Cost Breakdown
| Project Type | Typical Cost Range | Notes |
|---|---|---|
| Low garden wall (up to 3 ft) | $60–$110 per linear ft | Front boundary and planter walls |
| Standard boundary wall (4–6 ft) | $100–$200 per linear ft | Height drives both brick and footing cost |
| Reinforced footing | $25–$60 per linear ft | Below frost depth; included in the rates above |
| Brick piers or pilasters | $500–$1,500 each | At intervals and either side of openings |
| Coping or capping | $15–$45 per linear ft | Precast, natural stone or brick-on-edge |
| Gate opening with piers | $1,500–$5,000 | Excludes the gate and any automation |
| Typical 60 ft residential run | $6,000–$14,000 | Standard height with piers and capping |
| Permit and engineered drawings | $300–$2,000 | Required above a set height; varies by county |
Please note this is only an estimate. You can get a more accurate quote when you call our team or provide specific project details in our contact form.
Brick Fence & Wall FAQs
How much does a brick fence cost in Atlanta?
Brick fencing is priced by linear foot, then adjusted for height, wall thickness, brick selection, piers and any gates or ironwork. Footings are a significant part of the cost and are not visible in the finished job. We quote the run itemised, so footing, brickwork and capping are each visible.
Do I need a permit for a brick fence in Atlanta?
Usually yes once the wall passes a set height, and the threshold differs between Fulton, DeKalb, Cobb and Gwinnett. Corner lots and sight-line rules near driveways add further restrictions, and many HOAs have their own. We confirm the rules for your address and handle the permit as part of the job.
How deep should a brick wall footing be in Georgia?
Below the frost line and below the active clay zone, which in metro Atlanta generally means a poured reinforced footing at least twelve inches deep and wider than the wall. Taller walls need more. Footings placed shallow to save money are why you see brick fences with stepped diagonal cracks.
How long does a brick fence last?
Fifty to a hundred years, which is why the footing matters so much: you are building something that will outlast several timber fences. Maintenance amounts to repointing the joints once in a few decades. A capped wall with proper drainage behind it needs remarkably little attention in between.
How tall can a brick fence be?
Front-yard walls are commonly limited to around three to four feet and rear boundaries to six, but the exact figures are set by your county and any HOA covenant. Anything taller usually needs engineering. We check your specific limits before design, so the wall you approve is the wall permitted.